Our company’s gas atomized AlSiMg powder, good sphericity, low oxygen content, good fluidity.at present, aluminum alloys used in metal 3D printing mainly include AlSi12 and AlSi10Mg,they are lightweight additive metal powders with good thermal properties. It can be applied to thin-wall parts such as heat exchangers and other automotive parts, and also can be applied to aerospace and aerospace industrial grade prototype and production parts.
Share This Product
Our company’s gas atomized AlSiMg powder, good sphericity, low oxygen content, good fluidity.at present, aluminum alloys used in metal 3D printing mainly include AlSi12 and AlSi10Mg,they are lightweight additive metal powders with good thermal properties. It can be applied to thin-wall parts such as heat exchangers and other automotive parts, and also can be applied to aerospace and aerospace industrial grade prototype and production parts; The silicon/magnesium combination gives aluminum alloy strength and hardness, making it suitable for thin-walled and complex geometries, especially in applications with good thermal properties and low weight.
Due to its superior performance of light weight and high strength, magnesium aluminum alloy has been widely used in the lightweight demand of manufacturing industry. In 3D printing technology, it has also become the preferred candidate material of various manufacturers without exception.
* Remark:Supporting customized according to customer requirements
- Good thermal conductivity and wear resistance;
- Low thermal expansion coefficient;
- Light weight;
- High strength.
Gas atomized spherical powder can be used for 3D Printing, Spraying, Brazing, Electronic, Powder metallurgy industry, Solar industry, The lithium battery and other processing technology.
Alloy ingredient batching, intermediate frequency induction furnace melting, metal solution pouring out of the bag, atomization, steel powder collection, detection, screening, mixing, weighing, packing out of the warehouse.
Any questions? Send us message now! We’ll serve your request with a whole team after receiving your message.
How we play a role in the industry
Hot Isostatic Pressing (HIP) technology works by placing the product in a closed container, filling it with inert gas and sintering or densifying the product at a very high temperature (usually close to the forging temperature of the material) and at a very high pressure (usually 100 – 140 MPa). This allows the product to be sintered or densified.
MIM products can be complex in shape, precise in size, high in strength and produced automatically in large quantities, and can significantly reduce the complexity and cost of traditional metalworking
SLM, also known as Selective Laser Melting, is similar in principle to SLS in that a laser is used to melt and solidify metal powder in a specified area, which is then moulded in a layer-by-layer stack.
Electron beam melting refers to a vacuum melting method in which the kinetic energy of a high speed electron beam stream is converted to heat as a heat source for melting metals under high vacuum. The abbreviation is EBM.
Our Professional Services
For Additive Manufacturing
Thank you for your interest in our products. If you have any enquiry about quotation or cooperation, please feel free to leave us message by using the following enquiry form. Our sales representative will contact you within 24 hours.