17-4PH Stainless Steel Powder
Additive manufacturing (AM), also known as 3D printing. 3D printing technology is a kind of rapid prototyping technology. Many different metals and metal alloys are used in additive manufacturing.
Fast Delivery
High sphericity
High Quality
Small MOQ
Share This Product
Product Description
Component | Cr | Ni | Cu | Si | Mn | C | ||||
Standard % | 15.5-17.5 | 3-5 | 3-5 | ≤1 | ≤1 | ≤0.07 | ||||
Test% | 16.91 | 4.38 | 4.13 | 0.55 | 0.068 | 0.05 | ||||
Component | P | S | O | Nb | Fe | |||||
Standard % | / | / | / | 0.15-0.45 | Bal. | |||||
Test% | 0.01 | 0.002 | 0.049 | 0.38 | Bal. |
Product Properties
- Appearance: Grey spherical or nearly spherical powder
- Tapping Density: 4.46g/m3
- Apparent density: 4.01g/m3
- Flowability: 24.72s/50g
- Size: 15-53um
- PSD:D10=21.94μm,D50=35.58μm,D90=53μm
Characteristics:
- High Sphericity& High flowability;
- Low oxygen content. The Oxygen content is 300-800PPM;
- Narrow Particle Size Distribution.
Size (um) | Tapping Density (g/cm³) | Flowability (s/50g) | PSD (um) | ||
D10 | D50 | D90 | |||
15-45um | 4.4-4.8 | ≤30 | 20-24 | 30-35 | 50-55 |
15-53um | 4.4-4.9 | ≤30 | 21-26 | 33-39 | 52-58 |
45-120um | 4.4-4.8 | ≤30 | 53-57 | 89-93 | 144-152 |
Note: Other 3D printing powders are available upon any custome requirements
Stainless Steel Powder:
Alloy |
Nominal Composition |
Remark |
|||||||||
C | Si | Cr | Ni | Mn | Mo | Cu | W | V | Fe | ||
316L | ≤0.03 | ≤1.00 | 16.0~18.0 | 10.0~14.0 | ≤2.00 | 2.0~3.0 | – | – | Bal. | ||
304L | ≤0.03 | ≤1.00 | 18.0~20.0 | 8.0~12.0 | ≤2.00 | – | – | – | – | Bal. | |
17-4PH | ≤0.07 | ≤1.00 | 15.0-17.5 | 3.0~5.0 | ≤1.00 | – | 3.00-5.00 | – | – | Bal. | NB:0.15~0.45 |
HK30 | 0.25~0.35 | ≤1.50 | 24.0~26.0 | 19.0~22.0 | ≤2.00 | ≤0.5 | – | – | – | Bal. | |
4340 | 0.38~0.43 | 0.15~0.35 | 0.7~0.9 | 1.65~2.00 | 0.6~0.8 | 0.2~0.3 | – | – | – | Bal. | |
430 | ≤0.12 | ≤0.75 | 16.0~18.0 | – | ≤1.00 | – | – | – | – | Bal. | |
440C | 0.95~1.25 | ≤1.00 | 16.0~18.0 | – | ≤1.00 | – | – | – | – | Bal. | |
440CN | 0.95~1.25 | ≤1.00 | 16.0~18.0 | – | ≤1.00 | – | ≤0.5 | – | – | Bal. | |
420J1 | 0.16~0.25 | ≤1.00 | 12.0-14.0 | ≤0.6 | ≤1.00 | – | – | – | – | Bal. | |
420J2 | 0.30~0.40 | ≤1.00 | 12.0-14.0 | ≤0.6 | ≤1.00 | – | – | – | – | Bal. | |
S136 | 0.20~0.45 | 0.8~1.0 | 12.0-14.0 | – | ≤1.00 | – | – | – | 0.15~0.40 | Bal. | |
D2 | 1.40~1.60 | ≤0.4 | 11.0~13.0 | – | ≤0.6 | 0.8~1.2 | – | – | 0.2~0.5 | Bal. | |
H11 | 0.32-0.45 | 0.6-1 | 4.7-5.2 | – | 0.2-0.5 | 0.8-1.2 | – | – | 0.2-0.6 | Bal. | |
H13 | 0.32-0.45 | 0.8-1.2 | 4.75-5.5 | – | 0.2-0.5 | 1.1-1.5 | – | – | 0.8-1.2 | Bal. | |
M2 | 0.78~0.88 | 0.2-0.45 | 3.75-4.5 | – | 0.15-0.4 | 4.5-5.5 | – | 5.5-6.75 | 1.75-2.2 | Bal. | |
M4 | 1.25~1.40 | 0.2-0.45 | 3.75-4.5 | – | 0.15-0.4 | 4.5-5.5 | – | 5.25~6.5 | 3.75~4.5 | Bal. | |
T15 | 1.4-1.6 | 0.15-0.4 | 3.75-5 | – | 0.15-0.4 | – | – | 11.75-13 | 4.5-5.25 | Bal. | Co:4.75~5.25 |
Pulverizing process:
- Matching, we need to match the alloy according to the proportion.
- Melting, put the prepared metal alloy in a high temperature for melting and smelting, so that the metal powder becomes a flowing liquefied body.
- After high temperature, the alloy is deoxidized, slag-forming, slag-removing, and slag-removing treatment, and finally added to the alloy product.
- After cooling and grinding, the product is filtered and cooled, and then the alloy block metal is pulverized. The pulverized powder particles are sent to the cyclone separation or rotating drum by wind force, and the ventilation reaches a certain level. The product is collected, and finally sieved and packaged into a product. By filtering out residual materials or substances with excessively large particles, qualified products are packaged for processing.
Application
- 3D Printing
- Injection molding(MIM)
- Powder metallurgy(PM)
- Spraying coating(SP) etc.
PREP System
AM Powder
Sent Inquiry
Any questions? Send us message now! We’ll serve your request with a whole team after receiving your message.
Related products
-
Best 17-4PH powder stainless steel powder for 3D Printing
17-4PH powder, also known as 17-4 Precipitation Hardening stainless steel…
-
Best IN738 powder for 3D printing in 2023
Inconel 738 powder is a remarkable superalloy that boasts exceptional…
-
Titanium Powder
Titanium is strong, lightweight, biocompatible and corrosion resistant, making it…
-
CoCrW Powder
CoCrW is one of the the stellite alloys, which can…
Applications
How we play a role in the industry
HIP Technology
Hot Isostatic Pressing (HIP) technology works by placing the product in a closed container, filling it with inert gas and sintering or densifying the product at a very high temperature (usually close to the forging temperature of the material) and at a very high pressure (usually 100 – 140 MPa). This allows the product to be sintered or densified.
MIM Technology
MIM products can be complex in shape, precise in size, high in strength and produced automatically in large quantities, and can significantly reduce the complexity and cost of traditional metalworking
SLM Technology
SLM, also known as Selective Laser Melting, is similar in principle to SLS in that a laser is used to melt and solidify metal powder in a specified area, which is then moulded in a layer-by-layer stack.
EBM Technology
Electron beam melting refers to a vacuum melting method in which the kinetic energy of a high speed electron beam stream is converted to heat as a heat source for melting metals under high vacuum. The abbreviation is EBM.
POPULAR SERVICE
Our Professional Services
For Additive Manufacturing
Various Products
Here we provide more than 40 grades of high-quality powders.
3D Printing
SEBM&PREP technology and equipment.
Customization
Accept OEM/ODM
No Risk
Perfect supply chain layout
High Quality
Top sales and quality
Fair Prices
High quality products at reasonable prices
Send Inquiry
Thank you for your interest in our products. If you have any enquiry about quotation or cooperation, please feel free to leave us message by using the following enquiry form. Our sales representative will contact you within 24 hours.